SF powder separator is a high-efficiency powder separator. It is a new type of analysis equipment developed by comprehensively considering the uneven distribution of centrifugal and cyclone powder separators and the uneven flow field.

1. The advantages of comprehensively adopting multiple grading positions of gravity centrifugation and cyclone vortex;

2. The spindle speed is adjusted by a speed-regulating motor, the fineness adjustment is convenient and the adjustment range is wide;

3. High-efficiency and low-resistance cyclone dust collectors are used to reduce fluid resistance and improve dust collection efficiency;

4. Long service life. The wear-resistant parts of the vulnerable parts of the powder separator are made of wear-resistant materials or processed with anti-wear technology. The wear rate is extremely low, which effectively extends its service life.

5. Easy installation.

The material enters through the feed pipe and is scattered into the rising air flow through the dispersing plate. The grinding medium fragments in the material fall under the action of gravity, overcome the resistance of the rising air flow, and are discharged through the slag discharge port. The air flow carrying the powder rises to the classification part and enters the rotor through the guide vanes for classification. The guide vane can make the air flow and powder particles produce a rotary motion, pre-classify, and collect the coarse particles thrown out by the rotor, and also make the speed of the air flow evenly distributed throughout the height of the rotor. The coarse particles collected by the guide vanes fall onto the coarse powder cone and are discharged from the coarse powder outlet, while the fine particles and airflow pass through the rotor blade and enter the middle of the rotor, and are sent to the collection device from the fine powder outlet.